Want lots of angle from your 350z, g35 or v35? Don't want to pay over a grand (sometimes 2 or 3) to get 60 degrees? Enter the Gktech angle kit. Depending on options, these can be had for a little over 200 bucks. FINALLY! Snag em here in the US:
The GKTECH Z33 350z/Infiniti G35 angle kit is a simple, lightweight, yet super effective bolt on steering kit.
It is a bolt on kit, meaning it can be fitted and removed with no modifications.
With 30% faster steering and a height adjustable rod end for some added bump steer correction these are not just suitable for dedicated drift cars and will work equally as well for a grip/street car looking to speed their steering up.
If you own one of these vehicles, you would know the OEM steering angle on the Z/G chassis sucks! We measured them to having around 37 degrees lead wheel and even less trailing. This kit will allow you to get around 60 degrees of lock lead wheel and with close to 0 ackerman you will acheive near parallel front steering.
We strongly recommend our bolt on rack spacer to make the most of the kit but they are an optional item as some people may already have a rack spacer.
More information on this can be seen in the FAQ below.
- 30% faster steering
- Near 0 ackerman
- Bump steer correction
- Circa 60 degrees of steering lock
Vehicle Compatibility:
- Nissan Z33 350z
- Infiniti G35
NOTE: Ensure to set the lock stop prior to the caliper hitting the strut on lock.
0 Comments