How to make your own rocks with Divine Specks molds. Easy Tutorial!

Materials: Divine Specks' mold , cement , water.

Molds:

Facebook:

Outdoor cement:

Just add water and mix - Scoop Gently into mold, and tap bottom and sides to help the bubbles rise. Follow the manufacturer's instructions.

You can experiment with a cup of cement and gradually add water and see that the cement is the consistency like a pudding.


1. Wear a dust mask and mix Outdoor Cement following the directions
on the cement label. Add water, then mix with the cement.

2. Pour cement slowly and evenly while the cement is drying.

3. Tap the sides of the mold for two to three minutes to release any air bubbles
in the cement.

4. Wait approximately 5-24 hours (time may vary due to climate) for the cement
to harden. Once it has cooled and set remove the stone from the mold.

5. Fill in any remaining air holes by mixing a small amount of Outdoor
Cement into a paste and rubbing the cement into the holes in a circular
motion. If your project gets any marks or if you have contact lines on the
cement you may smooth the cement out with sandpaper.
Allow stone to cure for 24-48 hours before painting.

rocks,mandala,molds,do it yourself,paint,happy dotting,dots,divine specks,paint rocks,make rocks,make stones,stones,paint stones,paint mandala,mandala rocks,